Epoxy-Cast Window-Type Current Transformers for Indoor Application, 3.6 kV
CR-3S Series
2-core & single-core models. Indoor window-type current transformers for the main panel or motor control panel of a MV (≦ 3.6 kV) power system. Good for protection and appropriate for measuring and monitoring instruments. Araldite® epoxy resin.
About the Product
Insulated with Araldite® epoxy resin and designed for indoor use, these window-type current transformers are suited for the main panel or motor control panel of a medium-voltage (≦ 3.6 kV) power system. Good for protection and appropriate for measuring and monitoring instruments, these current transformers are available in both 2-core and single-core models. The window-type design facilitates installation and wiring with a busbar or insulated cables, which decreases the occurrence rate of contact point failure. The CR-3S Series current transformers are characterized by a high degree of moisture resistance, as well as superior physical and electrical properties.
Specifications
- Standards: IEC or IEEE
- Two-core & single-core models
- Indoor usage
- Epoxy cast (Araldite® epoxy resin)
- Rated Voltage: ≦ 3.6 kV
- Frequency: 50 or 60 Hz
- AC/BIL: 10/40 kV
- Other specifications upon request
Selection Table
Other standards and specifications available.
* Window diameter varies according to models
Available Models
CR-3S-30, CR-3S-60, CR-3S-70, CR-3S-90, CR-3S-45A, CR-3S-60A, CR-3S-75A, CR-3S-130A, CR-3S-90B , CR-3S-140B
- Download Documents
CIC Company Profile
Learn about our company: history, strengths, products, global locations, and our Advanced Electricity Lab.
【Product Brochure】Window-Type Medium-Voltage Epoxy-Cast Current Transformers for Indoor Use (CR-3S Series)
Easy-to-print document, containing product description, specifications, and a selection table.
【Product Dimensions】Window-Type Medium-Voltage Epoxy-Cast Current Transformers for Indoor Use (CR-3S Series)
Download PDF for basic drawing(s) and dimensions of this product. For more detailed information, please contact CIC.
-
CT & PT Selection Guide: How to Choose a Current Transformer or Potential Transformer
How to select, based on application and power system attributes, the primary and secondary currents, burden, accuracy, rated frequency, type (indoor vs. outdoor), insulation material, etc.
- Related Products
3.6 kV Two-Core Epoxy-Cast Current Transformer
ER-3C
Offering a higher rated current ratio, this medium-voltage, two-core current transformer is suited to the main panel or the motor control panel of a 3.6 kV (max.) power system and can be used with measuring or monitoring instruments, or with protective relays. Araldite® epoxy resin.
Low-Voltage Current Transformer for Higher Current Ratio and Higher Accuracy - Window Diameter up to 160mm
CR-1S Series
Low-voltage current transformers of the CR-1S Series, available in multi-ratio or single-ratio models, offer higher current ratios (800-4000/5A), higher accuracy, and larger window diameters (even to 160mm or 6.3”) for convenient installation over high current busbars. These epoxy-resin-cast low-voltage (720 volts / 600 volts, or 0.72 kV / 0.6 kV) current transformers facilitate wiring while decreasing contact failure rates.
3.6 kV / 7.2 kV Current Transformers (1-Core / 2-Core & Single-Ratio / Dual-Ratio Options)
CR-3(6)S-T Series
Intended for the main panel or the motor control panel of a 3.6/7.2 kV power system and designed to be used with measuring or monitoring instruments, or with protective relays. Each CT has a busbar terminal. Insulated with Araldite® epoxy resin.
Coil Molded Single-Phase Voltage Transformers (Potential Transformers), Indoor Use
EP-3SF/6SF Series
Voltage transformers of the EP-3SF/6SF Series are coil-molded, single-phase, indoor-type, medium-voltage, epoxy-resin-insulated potential transformers suitable for power systems of 7.2kV or below. Made with either a laminated core (Model EP-3SF2) or a cut core (EP-3SF5 & EP-6SFK), the voltage transformer has two power fuses attached to the primary side. Specific models from this series can be used as an auxiliary power source for circuit breaker operation — that is, as a control power transformer (CPT), also referred to as a control transformer (CTR), industrial control transformer, or machine tool transformer.
Voltage Transformers (Potential Transformers) as Circuit Breaker Operation Power Source
EPF-3SF1, EPF-6SF2
Voltage transformers EPF-3SF1 and EPF-6SF2 are medium-voltage, indoor-type potential transformers cast in epoxy resin, commonly installed on switchgear (3.3kV or 6.6kV) to serve as an auxiliary power source* for circuit breaker operation. Positioned atop the switch as an operational power source, these transformers can handle relatively high outputs for short durations. Featuring Class-F heat-resistant insulation material for the coils, each voltage transformer is equipped with two power fuses on the primary side to safeguard against overload and short-circuit currents.* Auxiliary power source: In this application, the voltage transformer may also be referred to as a "control power transformer" (CPT), "control transformer" (CTR), "industrial control transformer," or a "machine tool transformer."
Three-Phase Grounding Voltage Transformer (GVT), or Grounding Potential Transformer (GPT), for MV Indoor Applications
EGP-3DF, EGP-6DF
This ground voltage transformer (GVT), or ground potential transformer (GPT), is a three-phase medium-voltage (MV) potential transformer for indoor applications. With a fuse for each phase, this PT (VT) features epoxy-insulated coils and a five-legged (five-limbed) laminated core. This voltage transformer is used with measuring or monitoring instruments, or for ground-fault protection.
